QJF1064X1MB Four point contact ball bearing

• QJF1044X1MA Four point contact ball bearing

  Cap bolt recommended tightening torque:298.3 N·m; Housing:SAFS 524; N1:22.225 mm; P120°:94.3 kN; A1:120.65 mm; Initial grease fill:379.89 g; J min.:336.55 mm; Mass pillow block:62.6 kg; ba:53.181 mm; P60°:249 kN;

  Read More ...

• QJ236MA Four point contact ball bearing

  Static (Coa):153 kN; d2:70 mm; T:26.25 mm; r1s (min):1.5 mm; Pu:18.660 kN; D:125 mm; C:21 mm; r2s (min):0.6 mm; B:24 mm; rs (min):2 mm;

  Read More ...

• QJ1064X1MA Four point contact ball bearing

  r1,2 min.:1.1 mm; Basic dynamic load rating C:17.2 kN; Basic static load rating C0:12.9 kN; Db max.:90.8 mm; Calculation factor fHC:1.01; Static axial stiffness, preload class B:83 N/µm; Calculation factor f2B:1.03; Preload class A GA:92 N; Calculation factor f0:8.5; d2:70.6 mm;

  Read More ...

• QJF228MB Four point contact ball bearing

  a:19.316 mm; Ca min.:3 mm; Basic dynamic load rating C:60.3 kN; Cb min.:4.5 mm; Dimension series:16000; Calculation factor Y:1.5; Mass bearing:0.39 kg; Reference speed:8000 r/min; db min.:50.5 mm; Calculation factor Y0:0.8;

  Read More ...

• QJ1038N2MA Four point contact ball bearing

  B:11.00 mm; D:35.0000 mm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; Oil Speed Rating n2:26000 rpm; Basic Dynamic Radial Load Rating C:8060 N; d:10.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:26000 rpm; Basic Static Radial Load Rating Co:3400 N;

  Read More ...

• QJ1276N2MA Four point contact ball bearing

  Basic static load rating C0:815 kN; Fatigue load limit Pu:98 kN; D1 ≈:153.2 mm; d:100 mm; b:11.4 mm; C:119 mm; d1 ≈:135 mm; B:120 mm; r min.:2.3 mm; Maximum static radial loads F0r max.:570 kN;

  Read More ...

• QJ248N2MA Four point contact ball bearing

  Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating 15 B Bearing C2:76100 N; Grease Speed Rating n1:5300 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating 40 AA Pair C1:143000 N; Angle Third:40 º; d:50.000 mm; B:81.00 mm; Oil Speed Rating n2:7000 rpm; Basic Static Radial Load Rating 15 B Bearing Co2:52000 N;

  Read More ...

• QJ1952N2MA Four point contact ball bearing

  B:11.00 mm; D:35.0000 mm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; Oil Speed Rating n2:26000 rpm; Basic Dynamic Radial Load Rating C:8060 N; d:10.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:26000 rpm; Basic Static Radial Load Rating Co:3400 N;

  Read More ...

• QJ1068N2MA Four point contact ball bearing

  Static (Coa):153 kN; d2:70 mm; T:26.25 mm; r1s (min):1.5 mm; Pu:18.660 kN; D:125 mm; C:21 mm; r2s (min):0.6 mm; B:24 mm; rs (min):2 mm;

  Read More ...

• QJ222MA Four point contact ball bearing

  Static (Coa):153 kN; d2:70 mm; T:26.25 mm; r1s (min):1.5 mm; Pu:18.660 kN; D:125 mm; C:21 mm; r2s (min):0.6 mm; B:24 mm; rs (min):2 mm;

  Read More ...

• QJF1044X1MA Four point contact ball bearing

  Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating 15 B Bearing C2:76100 N; Grease Speed Rating n1:5300 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating 40 AA Pair C1:143000 N; Angle Third:40 º; d:50.000 mm; B:81.00 mm; Oil Speed Rating n2:7000 rpm; Basic Static Radial Load Rating 15 B Bearing Co2:52000 N;

  Read More ...

• QJ324N2MA Four point contact ball bearing

  Cap bolt recommended tightening torque:298.3 N·m; Housing:SAFS 524; N1:22.225 mm; P120°:94.3 kN; A1:120.65 mm; Initial grease fill:379.89 g; J min.:336.55 mm; Mass pillow block:62.6 kg; ba:53.181 mm; P60°:249 kN;

  Read More ...

• QJ1988N2MA Four point contact ball bearing

  Speed Rating-Open and Shielded-Oil OSO:6700 rpm; Accessories:300SWI Non-Filling N; Basic Radial Load Rating-Dynamic DC:71500 N; Basic Radial Load Rating-Static SCO:45000 N; d:55.000 mm; Speed Rating-Open and Shielded-Grease OSG:5600 rpm; Fillet Radius ra:2.00 mm; Width - Outer Ring B0:29.0 mm; Width - Inner Ring B1:49.21 mm; Diameter E:74.0 mm;

  Read More ...

• QJ326N2MA Four point contact ball bearing

  B:38.10 mm; Accessories:No Shield, no Seal,; d:65.000 mm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:80600 N; Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:73500 N; D:120.0000 mm; Oil Speed Rating n2:4800 rpm; Fillet Radius ra:1.50 mm;

  Read More ...

• QJF1021MB Four point contact ball bearing

  Stabilizing ring:SR-16-13; Labyrinth ring:2 x LOR 44; P180°:52.5 kN; Bearing limiting speed:6000 r/min; PG:1/8 NPT; R2:21.431 mm; Cap bolt:2 x 5/8-11 UNC; P120°:49.8 kN; Pa:7.83 kN; Da:140 mm;

  Read More ...

Brilliance Bearing Technology CO.,LTD is mainly engaged in the production of the angular contact ball bearing,precision crossd roller bearing,the section ball bearing,cylindrical roller bearing,spherical roller bearing,thrust roller and ball bearings and the customer made non-standard bearings.Our products have been widely used for machine tools,weapon,mining,metallurgy,port machinery,medical treatment,cement,oil drilling,textile,industrial robots,papermaking machinery,concrete mixer truck,rolling mill and the national defense industry field.