NCF29/600V KF Cylindrical roller bearing

• NCF29/600V NK Cylindrical roller bearing

  D:225 mm; Oil:3 500 min-1; rs:3 mm; Static (Cor):153.000 kN; ra:2.5 max; Bearing designation:6321  ; Grease:3 000 min-1; B:49 mm; d:105 mm; Da:211 max;

  Read More ...

• NCF29/560-V NKE Cylindrical roller bearing

  D:225 mm; Oil:3 500 min-1; rs:3 mm; Static (Cor):153.000 kN; ra:2.5 max; Bearing designation:6321  ; Grease:3 000 min-1; B:49 mm; d:105 mm; Da:211 max;

  Read More ...

• NCF29/530V KF Cylindrical roller bearing

  Grease Speed Rating n1:1100 rpm; Oil Speed Rating n2:1400 rpm; Basic Dynamic Radial Load Rating C:676000 N; Basic Static Radial Load Rating Co:1290000 N; d:260.000 mm; B:118.00 mm; D:430.0000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm;

  Read More ...

• NCF29/600-V NKE Cylindrical roller bearing

  Grease:1330 kN; d:220 mm; B:60 mm; Static (Cor):8.3 mm; Oil:121.770 kN; D:300 mm; Pu:680 kN; rs (min):2.1 mm; with cylindrical bore:1 500 min-1; with tapered bore:1 900 min-1;

  Read More ...

• NCF29/500-V NKE Cylindrical roller bearing

  J1:82.55 mm; J min.:371.475 mm; Cap bolt:2 x 1-8 UNC; Bearing limiting speed:3200 r/min; Da:225.001 mm; A1:133.35 mm; Ca:75.616 mm; P120°:73.8 kN; J max.:406.4 mm; Stabilizing ring:2 x SR-0-21;

  Read More ...

• NCF29/1000V KF Cylindrical roller bearing

  A1:111.125 mm; A2:152.797 mm; Appropriate attachment bolt size G:0.875 in; P60°:136 kN; RG:3/8 NPT; J max.:333.375 mm; Initial grease fill:365.71 g; J min.:295.275 mm; R2:30.163 mm; PG:1/4 NPT;

  Read More ...

• NCF29/500 V CX Cylindrical roller bearing

  da:84.138 mm; P120°:50.7 kN; R1:58.737 mm; Cap bolt:2 x 3/4-10 UNC; Initial grease fill:365.71 g; h:42.069 mm; Cap bolt recommended tightening torque:203.4 N·m; RG:3/8 NPT; H2:44.45 mm; Appropriate attachment bolt size G:0.875 in;

  Read More ...

• NCF29/530-V NKE Cylindrical roller bearing

  RG:3/8 NPT; Mass pillow block:29.9 kg; P120°:32 kN; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt:2 x 3/4-10 UNC; N1:22.225 mm; P150°:28.9 kN; S:4.763 mm; Stabilizing ring:SR-19-16; Bearing:22316 EK;

  Read More ...

• NCF29/500 V IO Cylindrical roller bearing

  J1:82.55 mm; J min.:371.475 mm; Cap bolt:2 x 1-8 UNC; Bearing limiting speed:3200 r/min; Da:225.001 mm; A1:133.35 mm; Ca:75.616 mm; P120°:73.8 kN; J max.:406.4 mm; Stabilizing ring:2 x SR-0-21;

  Read More ...

• NCF2892-V NKE Cylindrical roller bearing

  Grease Speed Rating Open/Shielded n1:12000 rpm; Accessories:Two Shields; D:62.0000 mm; d:17.000 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; Basic Dynamic Radial Load Rating C:22900 N; Fillet Radius ra:1.00 mm; B:17.00 mm; Basic Static Radial Load Rating Co:10800 N; Sealed Speed Rating n3:8500 rpm;

  Read More ...

• NCF2892V/HB1 KF Cylindrical roller bearing

  da max.:125 mm; Mass bearing + sleeve:5.75 kg; Calculation factor e:0.23; Limiting speed:4300 r/min; Fatigue load limit Pu:46.5 kN; d3:145 mm; d1:100 mm; Calculation factor Y0:2.8; Basic static load rating C0:440 kN; B:45 mm;

  Read More ...

• NCF2896-V NKE Cylindrical roller bearing

  Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:27500 N; Basic Dynamic Radial Load Rating C:37700 N; Sealed Speed Rating n3:6000 rpm; Grease Speed Rating n1:6000 rpm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Accessories:Shield & Seal & Snap; d:35.000 mm; B:30.20 mm;

  Read More ...

• NCF29/1000-V NKE Cylindrical roller bearing

  Da max.:123.5 mm; da max.:78 mm; rb max.:3.3 mm; ra max.:3.5 mm; Basic dynamic load rating C:353 kN; d1 ≈:97.5 mm; Cb min.:9.5 mm; Fatigue load limit Pu:45.5 kN; Da min.:110 mm; Calculation factor Y0:1;

  Read More ...

• NCF29/560V/HB1 KF Cylindrical roller bearing

  da:84.138 mm; P120°:50.7 kN; R1:58.737 mm; Cap bolt:2 x 3/4-10 UNC; Initial grease fill:365.71 g; h:42.069 mm; Cap bolt recommended tightening torque:203.4 N·m; RG:3/8 NPT; H2:44.45 mm; Appropriate attachment bolt size G:0.875 in;

  Read More ...

Brilliance Bearing Technology CO.,LTD is mainly engaged in the production of the angular contact ball bearing,precision crossd roller bearing,the section ball bearing,cylindrical roller bearing,spherical roller bearing,thrust roller and ball bearings and the customer made non-standard bearings.Our products have been widely used for machine tools,weapon,mining,metallurgy,port machinery,medical treatment,cement,oil drilling,textile,industrial robots,papermaking machinery,concrete mixer truck,rolling mill and the national defense industry field.