K81130TN KF Thrut Roller bearing

• ZR3.20.2000.400-1PPN IB Thrut Roller bearing

  Housing:SAF 044 KA; Appropriate attachment bolt size G:1.25 in; Mass pillow block:153 kg; H:401.637 mm; ba:80.169 mm; Max. speed for Taconite seal:385 r/min; Da:339.999 mm; L:711.2 mm; Adapter sleeve assembly:SNW 3044x7.7/8; J1:114.3 mm;

  Read More ...

• ZR3.32.4000.400-1PPN IB Thrut Roller bearing

  Basic Static Radial Load Rating Co:160000 N; Basic Dynamic Radial Load Rating C:157000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; B:43.00 mm; D:190.0000 mm; d:90.000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.50 mm; Accessories:Snap-Ring;

  Read More ...

• ZR3.25.2800.400-1PPN IB Thrut Roller bearing

  Accessories:Two Shields; d:9.500 mm; Grease Speed Rating Open/Shielded n1:31000 rpm; Shielded or Sealed B1:7.1 mm; Sealed Speed Rating n3:21000 rpm; Basic Static Radial Load Rating Co:1340 N; Fillet Radius ra:0.41 mm; D:22.2000 mm; Basic Dynamic Radial Load Rating C:3320 N; Width Plain B:5.6 mm;

  Read More ...

• ZR3.32.3550.400-1PPN IB Thrut Roller bearing

  B1:11 mm; Mass angle ring:0.42 kg; r3,4 min.:2.1 mm; d1 ≈:104.15 mm; B2:19.5 mm; d:75 mm;

  Read More ...

• ZR3.32.2500.400-1PPN IB Thrut Roller bearing

  Tolerance shaft:h9; Tolerance housing:H7; Specific static load factor K0:80 N/mm²; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.06; d:14 mm; Permissible sliding velocity v max.:1 m/s; D:16 mm; Specific dynamic load factor K:40 N/mm²;

  Read More ...

• ZR3.40.4500.400-1PPN IB Thrut Roller bearing

  Da max.:98 mm; r1,2 min.:1.5 mm; ra max.:1.5 mm; Reference speed:1000 r/min; Mass bearing:3.63 kg; Minimum axial load factor A:0.108; Fatigue load limit Pu:114 kN; d:90 mm; Basic dynamic load rating C:265 kN; Limiting speed:2000 r/min;

  Read More ...

• ZR3.20.1250.400-1PPN IB Thrut Roller bearing

  d:180.000 mm; Fillet Radius rb:1.00 mm; D:380.0000 mm; Grease Speed Rating n1:950 rpm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:650000 N; Basic Static Radial Load Rating Co:1100000 N; Oil Speed Rating n2:1400 rpm; B:150.00 mm;

  Read More ...

• ZR3.20.1600.400-1PPN IB Thrut Roller bearing

  Bearing designation:16005  ; Grease:14 000 min-1; rs:0.3 mm; Static (Cor):4.550 kN; Dynamic (Cr):6.950 kN; ra:0.3 max; d:25 mm; da:27 min; Pu:0.207 kN; Oil:17 000 min-1;

  Read More ...

• ZR3.32.3150.400-1PPN IB Thrut Roller bearing

  Housing:SAF 044 KA; Appropriate attachment bolt size G:1.25 in; Mass pillow block:153 kg; H:401.637 mm; ba:80.169 mm; Max. speed for Taconite seal:385 r/min; Da:339.999 mm; L:711.2 mm; Adapter sleeve assembly:SNW 3044x7.7/8; J1:114.3 mm;

  Read More ...

• ZR3.32.2240.400-1PPN IB Thrut Roller bearing

  Da max.:98 mm; r1,2 min.:1.5 mm; ra max.:1.5 mm; Reference speed:1000 r/min; Mass bearing:3.63 kg; Minimum axial load factor A:0.108; Fatigue load limit Pu:114 kN; d:90 mm; Basic dynamic load rating C:265 kN; Limiting speed:2000 r/min;

  Read More ...

• ZR3.20.1400.400-1PPN IB Thrut Roller bearing

  d:105.000 mm; Grease Speed Rating n1:1800 rpm; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating n2:2800 rpm; Accessories:No Shield, no Seal; D:190.0000 mm; B:65.10 mm; Basic Static Radial Load Rating Co:180000 N; Fillet Radius ra:2.00 mm;

  Read More ...

• ZR3.40.4000.400-1PPN IB Thrut Roller bearing

  Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:78100 N; D:110.0000 mm; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm; B:36.50 mm; Accessories:No Shield, no Seal,;

  Read More ...

• ZR3.25.1800.400-1PPN IB Thrut Roller bearing

  B1:11 mm; Mass angle ring:0.42 kg; r3,4 min.:2.1 mm; d1 ≈:104.15 mm; B2:19.5 mm; d:75 mm;

  Read More ...

• ZR3.20.1800.400-1PPN IB Thrut Roller bearing

  Da max.:98 mm; r1,2 min.:1.5 mm; ra max.:1.5 mm; Reference speed:1000 r/min; Mass bearing:3.63 kg; Minimum axial load factor A:0.108; Fatigue load limit Pu:114 kN; d:90 mm; Basic dynamic load rating C:265 kN; Limiting speed:2000 r/min;

  Read More ...

• ZR3.32.2800.400-1PPN IB Thrut Roller bearing

  B1:11 mm; Mass angle ring:0.42 kg; r3,4 min.:2.1 mm; d1 ≈:104.15 mm; B2:19.5 mm; d:75 mm;

  Read More ...

Brilliance Bearing Technology CO.,LTD is mainly engaged in the production of the angular contact ball bearing,precision crossd roller bearing,the section ball bearing,cylindrical roller bearing,spherical roller bearing,thrust roller and ball bearings and the customer made non-standard bearings.Our products have been widely used for machine tools,weapon,mining,metallurgy,port machinery,medical treatment,cement,oil drilling,textile,industrial robots,papermaking machinery,concrete mixer truck,rolling mill and the national defense industry field.